Produkty
Drum pulleys will be designed, manufactured and delivered  to you according to basic parameters given by the client (see the Order form). We are able to ensure the drum pulley design and its strength calculation according to any dimension requirements up to roller diameter of 1 400 mm and total length of 6 500 mm. For bigger drum pulleys consultation with our technical department is necessary.

Product description:
Drums pulleys will be designed, manufactured and delivered  to you according to basic parameters given by the client (see the Order form). We are able to ensure the drum pulley design and its strength calculation according to any dimension requirements up to roller diameter of 1 400 mm and total length of 6 500 mm. For bigger drum pulleys consultation with our technical department is necessary.

In scope of spare parts management drum pulleys can also be delivered based on original TRANSPORTA documentation and/or manufactured according to client´s own documentation.


Drum pulleys are delivered in all basic structure designs:

  • drive pulley single sided
  • drive pulley double sided
  • reverse
  • tension
  • transfer

... and, moreover, without lining, with hot or cold vulcanized rubber lining, ceramic and/or other lining based on operation requirements. The drum pulleys are dynamically balanced. All products are subject to detailed output checks according to quality requirements of TRANSPORTA Technology s.r.o.


Basic parameters:

Limit parameters (in case of bigger dimensions consultation with the technical department is necessary):

  • diameter up to about 1 400 mm
  • total length up to 6 500 mm
  • different types of surfaces (rubber lining, ceramics ...)
  • special design (antimagnetic, rope ...)


Documents to download:

less...
Belt conveyors are tailored to given client´s needs.

Product description:
Belt conveyors are tailored to given client´s needs.

Belt conveyor consists of basic bearing structure placed between facilities and/or on supports. Supports spacing is given by the belt conveyor design.

There is a driving station with driving pulley placed in bearing bodies on one end of the basic structure. The drum pulley is equipped with electric gearbox (and/or gearbox-clutch-motor or hydraulic drive are used); electric drum pulley is another option.

Reverse station with reverse (tail) pulley also placed in bearing bodies is on the other end, and/or the drum pulley has bearings inside the body.

Mounts with idlers for belt guiding are installed on the frame between the driving and reverse station on the top strand and holders with return idlers for bottom strand are installed on the lower part of the structure.

All rotating parts of the belt conveyor are protected by safety covers.

Based of the client´s requirement belts conveyor will be equipped with material feed chute and/or discharge chute for material discharge.

For belt conveyors with incline up to 18° smooth profile of conveyor belt is used. For belt conveyors with incline over 18° belts with driving dogs preventing material back sliding are used. Conveyor belt type has to be consulted with the supplier with regard to transported material.


Basic parameters:

Dimensions and parameters (information figures):
belt width                 transport output                 Max. grain size
(mm)                           (m3/hour)                           (mm)
400                             40                                        90
500                             70                                      100
650                           120                                      135
800                           210                                      180
1000                           340                                      250
1200                           490                                      300
1400                           680                                      350
1600                           950                                      400


Documents to download:

less...
This equipment is usually placed under the drive station of belt conveyor where it is able to remove spills into the discharge chute. The width of cleaning chain conveyor is designed according to the width of the belt above.

Product description:

This equipment is usually placed under the drive station of belt conveyor where it is able to remove spills into the discharge chute. The width of cleaning chain conveyor is designed according to the width of the belt above.

For given width the equipment can be assembled into optional lengths from pre-designed segments according to requirements of specific application.

Next to basic dimension series we are also able to deliver conveyors of other parameters upon the client´s wish.

For narrow working profiles it is possible to deliver low design conveyors without side plates with partial reduction of efficient width.


Basic parameters:

Chain conveyor can be used, for instance, for:
•   coal transport
•   coke transport
•   ash and slag transport from boilers
•   gypsum transport
•   limestone transport
•   cement transport
•   solid alternative fuels transport
•   corn transport
•   fertilizers transport
•   biomass transport
•   wood chips transport
•   sawdust transport
•   wooden pellets transport
•   gravel-sand transport
•   aggregate transport
•   copper concentrate transport
•   sorted municipal waste transport

Documents to download:

 

less...
The conveyor is suitable for most bulk materials, e.g. coal, biomass, crashed alternative fuels, gypsum, limestone, pellets, gravel-sand, fertilizers, crashed municipal waste, etc.

Product description:
Basic technical design of this conveyor consists in using a chain for transmission of tension forces, and a rubber belt as transported material carrier. The conveyor is able to change rising gradient in relatively small radiuses; it is possible to cover it completely, exhaust dust and smell, the bottom strand is self-cleaning. Considerable advantage is markedly lower abrasion of the conveyor body due to material skidding known from conventional chain conveyors, while power consumption necessary for material transport is lower.

The whole conveyor has modular design with given building height. Based on required transport capacity transport speed and conveyor width are then modified.

The conveyor is suitable for most bulk materials, e.g. coal, biomass, crashed alternative fuels, gypsum, limestone, pellets, gravel-sand, fertilizers, crashed municipal waste, etc.

Transport capacity is in hundreds cubic meters per hour, and the conveyor length in tens of meters. We are ready to assess suitability and technical possibilities of transport exactly and individually based on the client´s requirement.


Basic parameters:

Advantages of chain-belt conveyor:
•   variability of transport route
•   lower abrasion and higher reliability (compared to conventional chain conveyor)
•   lower power consumption at given transported capacity
•   low operation costs
•   the conveyor is covered completely, it is dustless and can be fitted with filters


Documents to download:

less...
Hydro pohon pohyblivého dna sila
Kontidávkování šnekovnicemi do váhy
Semiautomatické ovládaní
Documents to download:
less...